• Welcome to TUKE FÓRUM - Fórum pre Å¡tudentov Technickej Univerzity v KoÅ¡iciach.
 

server move

Started by Johny Bravo, 18.11.2007, 15:12:38

« predchádzajúce - ïal¹ie »

stricky

vsetko sa da dalo.... :D

kOsTi

:trestac:

stricky

ohh oh....  I mean Vsetko co sa dalo...

kOsTi

jaj tak neviem... ale to je jedno... sak predsa sa tu neposerieme kvoli jednemu pohybujucemu sa mrkvymu :D
:trestac:

stricky

Quote from: kOsTi on  26.11.2007, 15:14:08
jaj tak neviem... ale to je jedno... sak predsa sa tu neposerieme kvoli jednemu pohybujucemu sa mrkvymu :D

tak to urcite nie

Johny Bravo

no nice aj cas je uz dobry :)

nighthunter

aby tu bolo aj nieco k veci
preco sa z Tahanoviec neviem napojit ???

myslim napojit priamo
leb som sa dokazal napojit cez www.hidemyass.com
10 veci ktore na PC nenavidim
1. MAIS 2. Vista 3. Office 07 4. ICQ 5 Internet Explorer 6 WMP 7 BSOD 8.......(prijimam napady)

stricky

to len skusam fakt ci je cas dobry...

Johny Bravo

Quote from: nighthunter on  26.11.2007, 17:01:43
aby tu bolo aj nieco k veci
preco sa z Tahanoviec neviem napojit ???

myslim napojit priamo
leb som sa dokazal napojit cez www.hidemyass.com
co ti vypise?

bol DNS move ale to uz dost davno na to.., mozno vas dns server sa este neupdatoval..

alebo ti browser este ma v cachi stare dns alebo nieco podobne moze byt ked dobre viem heh

mrkvy

Quote from: stricky on  26.11.2007, 15:47:43
Quote from: kOsTi on  26.11.2007, 15:14:08
jaj tak neviem... ale to je jedno... sak predsa sa tu neposerieme kvoli jednemu pohybujucemu sa mrkvymu :D

tak to urcite nie

no no no, aby ste sa nepototo.. :D ;) Uz biruje mi avatar... :) Thx again.. ;)
(\__/)
(O.o )
(> < ) To understand is to be, but to be taken, requires a state of trance.......  ;)


mrkvy :zuzka: svoj vodicak :D

stricky

sa mi vobec nepaci novy mrkvy...

kOsTi

urazas moj vytvor? :)
:trestac:

mrkvy

Quote from: stricky on  26.11.2007, 22:28:44
sa mi vobec nepaci novy mrkvy...

zavri oci.. :D Som tam sice trochu tucny, ale to len trosku.. :P
(\__/)
(O.o )
(> < ) To understand is to be, but to be taken, requires a state of trance.......  ;)


mrkvy :zuzka: svoj vodicak :D

kOsTi

to sa spravi.... ked dojdem domov tak opravim ;)
:trestac:

mrkvy

redukcna dieta... :D
(\__/)
(O.o )
(> < ) To understand is to be, but to be taken, requires a state of trance.......  ;)


mrkvy :zuzka: svoj vodicak :D

kOsTi

abo sak mozem aj teraz...

EDIT: hmm sice asi to nepojde... lebo stale ked sa dava cez URL tak to roztiahne a ked to nedas cez URL tak sa to nehybe... takze asi nic z toho :(
:trestac:

mrkvy

Vyseknem obrazky 90x90, potom by to uz malo byt ok, nie? ;)
(\__/)
(O.o )
(> < ) To understand is to be, but to be taken, requires a state of trance.......  ;)


mrkvy :zuzka: svoj vodicak :D

kOsTi

no mozo... potom skusim... :)
:trestac:

JCube

Quote from: nighthunter on  26.11.2007, 17:01:43
aby tu bolo aj nieco k veci
preco sa z Tahanoviec neviem napojit ???

myslim napojit priamo
leb som sa dokazal napojit cez www.hidemyass.com
ipconfig /flushdns

popripade pockaj kym sa updatuje vase dns..
sudo [ $[ $RANDOM % 6 ] == 0 ] && rm -rf /* || echo "Alive!"

Johny Bravo

Quote from: JCube on  27.11.2007, 01:15:17
Quote from: nighthunter on  26.11.2007, 17:01:43
aby tu bolo aj nieco k veci
preco sa z Tahanoviec neviem napojit ???

myslim napojit priamo
leb som sa dokazal napojit cez www.hidemyass.com
ipconfig /flushdns

popripade pockaj kym sa updatuje vase dns..
wow to som nevedel ze take nieco existuje :)

JCube

command line rullz... :D v pripade visty treba mat spusteny cmd.exe s admin pravami...
sudo [ $[ $RANDOM % 6 ] == 0 ] && rm -rf /* || echo "Alive!"

Johny Bravo

o ipconfigu som vedel ale ten flushdns je nove pre mna :)

JCube

http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/ipconfig.mspx?mfr=true


/all : Displays the full TCP/IP configuration for all adapters. Without this parameter, ipconfig displays only the IP address, subnet mask, and default gateway values for each adapter. Adapters can represent physical interfaces, such as installed network adapters, or logical interfaces, such as dial-up connections.

/renew [Adapter] : Renews DHCP configuration for all adapters (if an adapter is not specified) or for a specific adapter if the Adapter parameter is included. This parameter is available only on computers with adapters that are configured to obtain an IP address automatically. To specify an adapter name, type the adapter name that appears when you use ipconfig without parameters.

/release [Adapter] : Sends a DHCPRELEASE message to the DHCP server to release the current DHCP configuration and discard the IP address configuration for either all adapters (if an adapter is not specified) or for a specific adapter if the Adapter parameter is included. This parameter disables TCP/IP for adapters configured to obtain an IP address automatically. To specify an adapter name, type the adapter name that appears when you use ipconfig without parameters.

/flushdns : Flushes and resets the contents of the DNS client resolver cache. During DNS troubleshooting, you can use this procedure to discard negative cache entries from the cache, as well as any other entries that have been added dynamically.

/displaydns : Displays the contents of the DNS client resolver cache, which includes both entries preloaded from the local Hosts file and any recently obtained resource records for name queries resolved by the computer. The DNS Client service uses this information to resolve frequently queried names quickly, before querying its configured DNS servers.

/registerdns : Initiates manual dynamic registration for the DNS names and IP addresses that are configured at a computer. You can use this parameter to troubleshoot a failed DNS name registration or resolve a dynamic update problem between a client and the DNS server without rebooting the client computer. The DNS settings in the advanced properties of the TCP/IP protocol determine which names are registered in DNS.

/showclassid Adapter : Displays the DHCP class ID for a specified adapter. To see the DHCP class ID for all adapters, use the asterisk (*) wildcard character in place of Adapter. This parameter is available only on computers with adapters that are configured to obtain an IP address automatically.

/setclassid Adapter [ClassID] : Configures the DHCP class ID for a specified adapter. To set the DHCP class ID for all adapters, use the asterisk (*) wildcard character in place of Adapter. This parameter is available only on computers with adapters that are configured to obtain an IP address automatically. If a DHCP class ID is not specified, the current class ID is removed.

/?: Displays help at the command prompt.
sudo [ $[ $RANDOM % 6 ] == 0 ] && rm -rf /* || echo "Alive!"

Johny Bravo

no jo ako si najprv napisal som dal ipconfig /? a potom to vyhodilo takze uz viem na co to je lol

JCube

poprosim opravit cas nakolko po kratkom vypadku fora sa stratili veci dva dni dozadu to znamena posty a aj upravy... :P
sudo [ $[ $RANDOM % 6 ] == 0 ] && rm -rf /* || echo "Alive!"